DIGITAL TENSION METER
Tension Meter DTSE
December 12, 2019
Belt Tension Gauge
Belt Tension Meter RTM-400
December 12, 2019

Tension Meter KXE

2 Tension ranges available
0.50 – 20.00 daN and to 0.5 – 50.0 daN

The KXE Warp Tension Meter is designed to measure tensions during warping and weaving

Hand-held tension meter for determining the tension of 50 mm of ends

The unique designed sensor can easily be engaged or disengaged while the machine is running

Description

Special Features

• The portable Tension meter KXE is made of a sensor and indicator

• The sensor can easily be engaged or disengaged also while the machine is running

• The unique sensor configuration provided two 22 mm wide cylindrical roller for the capture of two groups of yarns, one on each side of the sensor for measurement. Therefore the sensor will be measuring 50 mm of ends while the process is running – see “Operation”

• The display can be rotated by 180° for better reading

• Storage of last, average, Max, MIN, PEAK tension values during an operator set measuring period. These values can be recalled in the display or downloaded to a PC

• Adjustable electronic damping for better reading when tension is constantly, strongly fluctuating

• The indicator can be connected to a PC using the USB interface to monitor readings constantly on a PC

• Memory of max. 4000 displayed tension values split up to 255 series of measurements and statistics (Last, AVG, MIN and MAX of displayed values, MIN-Peak and MAX-Peak are values measured within a measuring frequency of 100 Hz). Stored data can be transferred to a PC and analyzed using the FREE Tension Inspect
Content of the memory

• 4 different memory modes can be selected by the operator:
Mode S: only statistical values per series are displayed
Mode L: statistics plus 10 displayed values of each series of measurement
Mode C: statistics plus 4000 displayed values arbitrary split up to 255 series
Mode F: as C plus higher sampling rate of 100 Hz = values/s

• Powered by rechargeable Lithium Polymer battery (60 h battery life with 3.5 h charge time) with a universal voltage AC-charger

Tension meter KXE can be connected to a PC with the USB cable. With the FREE software SW-TI3 »Tension Inspect 3« readings can be displayed, statistically analyzed and saved. For more information see “Standard Accessories”

Standard Features

• Measurements can be made over the total width of the loom

• Sensor : ball-bearing mounted rollers – width – outer roller 100 mm, measuring roller 50 mm

• LCD display with illuminated background for better reading, update time 2 times a second

• CE approved (tested for electromagnetic compatibility)

• Certificate of Compliance with the order 2.1 according EN 10204 is included

• Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Available Models 

Model Tension Range
Resolution SCHMIDT Calibration Material*
KXE-20K 0.50 – 20.00 daN 0.01 daN fabric tape
KXE-50K 0.5 – 50.0 daN 0.1 daN fabric tape
* Suitable for 95 % of applications
Catalog
error: Content is protected !!